Dell Networking S6000 System, Справочное руководство

Страница: 904 / 1510

mode
To receive or transmit, set LLDP.
S6000
Syntax
mode {tx | rx}
To return to the default, use the
no mode {tx | rx}
command.
Parameters
tx Enter the keyword
tx
to set the mode to transmit.
rx Enter the keyword
rx
to set the mode to receive.
Defaults Both transmit and receive .
Command
Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if- interface -lldp)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series.
Related
Commands
protocol lldp (Configuration) — enables LLDP globally.
show lldp neighbors — displays the LLDP neighbors.
multiplier
Set the number of consecutive misses before LLDP declares the interface dead.
S6000
Syntax
multiplier integer
To return to the default, use the
no multiplier integer
command.
904
Link Layer Discovery Protocol (LLDP)