Dell Networking S6000 System, Справочное руководство

Страница: 1257 / 1510

Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Authentication key length increased to 42 characters.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.0 Introduced on the E-Series.
Usage
Information
The key configured on the switch must match the key configured on the RADIUS
server daemon.
If you configure the
key
parameter in the
radius-server host
command, the
key configured with the
radius-server key
command is the default key for all
RADIUS communications.
Related
Commands radius-server host — configures a RADIUS host.
radius-server retransmit
Configure the number of times the switch attempts to connect with the configured RADIUS host server
before declaring the RADIUS host server unreachable.
S6000
Syntax
radius-server retransmit retries
To configure zero retransmit attempts, use the
no radius-server retransmit
command.
To return to the default setting, use the
radius-server retransmit 3
command.
Parameters
retries Enter a number of attempts that FTOS tries to locate a
RADIUS server. The range is from zero (0) to 100. The default
is
3 retries .
Security
1257