Dell Networking S6000 System, Справочное руководство

Страница: 989 / 1510

ip ospf dead-interval
Set the time interval since the last hello-packet was received from a router. After the interval elapses, the
neighboring routers declare the router dead.
S6000
Syntax
ip ospf dead-interval seconds
To return to the default values, use the
no ip ospf dead-interval
command.
Parameters
seconds Enter the number of seconds for the interval. The range is
from 1 to 65535. The default is
40 seconds .
Defaults 40 seconds
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
Usage
Information By default, the dead interval is four times the default hello-interval.
Related
Commands ip ospf hello-interval — sets the time interval between the hello packets.
ip ospf hello-interval
Specify the time interval between the hello packets sent on the interface.
S6000
Syntax
ip ospf hello-interval seconds
To return to the default value, use the
no ip ospf hello-interval
command.
Open Shortest Path First (OSPFv2 and OSPFv3)
989