Dell Networking S6000 System, Справочное руководство

Страница: 991 / 1510

Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 9.1(0.0) Included usage information on maximum number of digest
keys per interface.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
Usage
Information
You can configure a maximum of six digest keys on an interface. Of the available
six digest keys, the switches select the MD5 key that is common. The remaining
MD5 keys are unused.
To change to a different key on the interface, enable the new key while the old key
is still enabled. Dell Networking OS sends two packets: the first packet
authenticated with the old key and the second packet authenticated with the new
key. This process ensures that the neighbors learn the new key and communication
is not disrupted by keeping the old key enabled.
After the reply is received and the new key is authenticated, delete the old key. Dell
recommends keeping only one key per interface.
NOTE: The MD5 secret is stored as plain text in the configuration file with
service password encryption. Write down or otherwise record the key. You
cannot learn the key once it is configured. Use caution when changing the
key.
ip ospf mtu-ignore
Disable OSPF MTU mismatch detection upon receipt of database description (DBD) packets.
S6000
Syntax
ip ospf mtu-ignore
To return to the default, use the
no ip ospf mtu-ignore
command.
Defaults Enabled.
Open Shortest Path First (OSPFv2 and OSPFv3)
991