Dell Networking S6000 System, Справочное руководство

Страница: 1098 / 1510

vlan vlan-range Enter the keyword
vlan
then the VLAN numbers. The range
is from 1 to 4094.
cost number Enter the keyword
cost
then the port cost value. The range
is from 1 to 200000.
Defaults:
• 100 Mb/s Ethernet interface = 200000 .
• 1-Gigabit Ethernet interface = 20000 .
• 10-Gigabit Ethernet interface = 2000 .
• Port Channel interface with one 100 Mb/s Ethernet =
200000 .
• Port Channel interface with one 1 Gigabit Ethernet =
20000 .
• Port Channel interface with one 10 Gigabit Ethernet =
2000 .
• Port Channel with two 1 Gigabit Ethernet = 18000 .
• Port Channel with two 10 Gigabit Ethernet = 1800 .
• Port Channel with two 100 Mbps Ethernet = 180000 .
priority value Enter the keyword
priority
then the Port priority value in
increments of 16. The range is from 0 to 240. The default is
128 .
loopguard (C-, S-, and E-Series TeraScale only) Enter the keyword
loopguard
to enable loop guard on a PVST+ port or port-
channel interface.
rootguard (C-, S-, and E-Series TeraScale only) Enter the keyword
rootguard
to enable root guard on a PVST+ port or port-
channel interface.
Defaults Not configured.
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.4.2.1 Introduced the
loopguard
and
rootguard
options on the
E-Series TeraScale, C-Series, and S-Series.
Version 8.3.7.0 Introduced on the S4810.
1098
Per-VLAN Spanning Tree Plus (PVST+)