Troubleshooting
STAR TRAC FITNESS
1 of 3
637-1347 Rev: A
Sticking Reset Button on Warm Bar
E-TR and S Series Treadmills
The warm bar has a clip that is tethered to the reset button. If excessive dirt builds up in the reset button, it may become
difficult to activate when pulled.
To resolve this, remove the reset button assembly (Fig. 1) from the warm bar and disassemble it to give it a thorough
cleaning.
Fig. 1
It is strongly recommended that this procedure is done over a hard surface. There are a few
small components that can easily be lost in carpet.
The diagram below (Fig. 2) shows how the reset switch is assembled.
Fig. 2
