Dell Networking S6000 System, Справочное руководство

Страница: 182 / 1510

resequence access-list
Re-assign sequence numbers to entries of an existing access-list.
S6000
Syntax resequence access-list {ipv4 | ipv6 | mac} { access-list-name StartingSeqNum Step-
to-Increment }
Parameters
ipv4 | ipv6 |
mac Enter the keyword
ipv4
or
mac
to identify the access list type
to resequence.
access-list-
name Enter the name of a configured IP access list.
StartingSeqNu
m Enter the starting sequence number to resequence. The
range is from 0 to 4294967290.
Step-to-
Increment Enter the step to increment the sequence number. The
range is from 1 to 4294967290.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale (IPv6).
Version 8.1.1.0 Introduced on the E-Series ExaScale (IPv4).
Version 7.8.1.0 Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names were up to 16 characters long.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series.
182
Access Control Lists (ACL)