Dell Networking S6000 System, Справочное руководство

Страница: 1346 / 1510

ipv6-address Enter the keyword host then the IPv6 address of the host in
the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
vrf vrf-name Enter the keyword
vrf
and then the name of the VRF that
the SNMP server uses to connect to the host.
NOTE: You can use this attribute to inform the SNMP
engine about the vrf instance to be used to reach the
corresponding remote host to send Trap or Inform
message. If no VRF is specified, then the default VRF is
used.
traps (OPTIONAL) Enter the keyword
traps
to send trap
notifications to the specified host. The default is traps .
informs (OPTIONAL) Enter the keyword
informs
to send inform
notifications to the specified host. The default is traps .
version 1 | 2c |
3 (OPTIONAL) Enter the keyword version to specify the
security model then the security model version number
1
,
2c
, or
3
:
• Version
1
is the least secure version.
• Version
3
is the most secure of the security modes.
• Version
2c
allows transmission of informs and counter
64, which allows for integers twice the width of what is
normally allowed.
The default is version 1 .
auth (OPTIONAL) Enter the keyword
auth
to specify
authentication of a packet without encryption.
noauth (OPTIONAL) Enter the keyword
noauth
to specify no
authentication of a packet.
priv (OPTIONAL) Enter the keyword
priv
to specify both
authentication and then scrambling of the packet.
community-
string Enter a text string (up to 20 characters long) as the name of
the SNMP community.
NOTE: For version 1 and version 2c security models, this
string represents the name of the SNMP community. The
string can be set using this command; however, Dell
Networking OS recommends setting the community
string using the
snmp-server community
command
before executing this command. For version 3 security
model, this string is the USM user security name.
1346
Simple Network Management Protocol (SNMP) and Syslog