Dell Networking S6000 System, Справочное руководство

Страница: 78 / 1510

Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Added support for TFTP and SCP.
Version 7.6.1.0 Introduced on the S-Series.
Usage
Information
You must reload Dell Networking OS after executing this command.
Example
Dell#upgrade boot ?
all Upgrade both boot flash image and selector image
bootflash-image Upgrade boot flash image
bootselector-image Upgrade boot selector image
Dell#
verify
Validate the software image on the flash drive after the image has been transferred to the system, but
before the image has been installed.
Syntax
verify
{
md5
|
sha256
}[
flash
:// ]
img-file [ hash-value ]
Parameters
md5 Enter the
md5
keyword to use the MD5 message-digest
algorithm.
sha256
Enter the
sha256
keyword to use the SHA256 Secure Hash
Algorithm
flash:// (Optional). Enter the
flash://
keyword. The default is to
use the flash drive. You can just enter the image file name.
img-file Enter the name the Dell Networking software image file to
validate.
hash-value (Optional). Enter the relevant hash published on i-Support.
Defaults flash drive
Command
Modes EXEC mode
Command
History Version 9.5.(0.0)
Introduced on the Z9000, S6000, S4820T, S4810, MXL
Usage
Information
You can enter this command in the following ways:
• verify md5 flash :// img-file
• verify md5 flash :// img-file < hash-value >
78
File Management