Dell Networking S6000 System, Справочное руководство

Страница: 303 / 1510

7
Bidirectional Forwarding Detection (BFD)
Bidirectional forwarding detection (BFD) is a detection protocol that provides fast forwarding path failure
detection.
The Dell Networking operating software implementation is based on the standards specified in the IETF
Draft draft-ietf-bfd-base-03 and supports BFD on all Layer 3 physical interfaces including VLAN
interfaces
and port-channels
BFD is supported on the S6000 platform.
bfd all-neighbors
Enable BFD sessions with all neighbors discovered by Layer 3 protocols virtual router redundancy
protocol (VRRP), intermediate system to intermediate system (IS-IS), open shortest path first (OSPF),
OSPFv3, or border gateway protocol (BGP) on router interfaces, and (optionally) reconfigure the default
timer values.
S6000
Syntax
bfd all-neighbors [interval interval min_rx min_rx multiplier
value role {active | passive}]
Parameters
interval
milliseconds
(OPTIONAL) Enter the keyword
interval
to specify non-
default BFD session parameters beginning with the
transmission interval. The range is from 50 to 1000. The
default is
100 .
min_rx
milliseconds
Enter the keyword
min_rx
to specify the minimum rate at
which the local system would like to receive control packets
from the remote system. The range is from 50 to 100. The
default is
100 .
multiplier value Enter the keyword
multiplier
to specify the number of
packets that must be missed in order to declare a session
down. The range is from 3 to 50. The default is
3 .
role [active |
passive] Enter the role that the local system assumes:
•
Active
— The active system initiates the BFD session.
Both systems can be active for the same session.
•
Passive
— The passive system does not initiate a
session. It only responds to a request for session
initialization from the active system.
Bidirectional Forwarding Detection (BFD)
303