Dell Networking S6000 System, Справочное руководство

Страница: 61 / 1510

CAUTION: This command deletes all files, including the startup
configuration file. So, after executing this command, consider saving the
running config as the startup config (use the
write memory
command or
copy run start
command).
Related
Commands
copy – copies the current configuration to either the startup-configuration file or
the terminal.
show file-systems – displays information about the file systems on the system.
fsck flash
Checks the flash file system for errors.
S6000
Syntax
fsck flash:
fsck usbflash:
Defaults none
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.1(0.0) Introduced on S4810 and Z9000.
Version
8.3.19.0 Introduced on S4820T.
Usage
Information Include the colon (:) when entering this command. This command checks the
specified flash memory for errors. If errors are found, the command recommends
that you format the flash.
CAUTION: If you elect to format the flash, all files – including the startup
configuration file – are lost. If you do decide to format the specified flash,
consider saving the running configuration as the startup configuration after
formatting the flash (use the
write memory
command or
copy run start
command).
File Management
61