Where the 2-byte format is from 1 to 65535, the 4-byte format is from 1 to
4294967295. Both formats are accepted and the advertisements reflect the
entered format.
For more information about using the 2 byte or 4-byte format, refer to the
Dell
Networking OS Configuration Guide
.
This command automatically restarts the BGP instance for the configuration to
take effect.
bgp graceful-restart
To support graceful restart as a receiver only, enable graceful restart on a BGP neighbor, a BGP node, or
designate a local router.
S6000
Syntax
bgp graceful-restart [restart-time
seconds
] [stale-path-time
seconds
] [role receiver-only]
To return to the default, use the
no bgp graceful-restart
command.
Parameters
restart-time
seconds
Enter the keyword
restart-time
then the maximum
number of seconds to restart and bring-up all the peers. The
range is from 1 to 3600 seconds. The default is
120 seconds
.
stale-path-time
seconds
Enter the keyword
stale-path-time
then the maximum
number of seconds to wait before restarting a peer’s stale
paths. The default is
360 seconds
.
role receiver-
only
Enter the keyword
role receiver-only
to designate the
local router to support graceful restart as a receiver only.
Defaults
as above
Command
Modes
ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 7.8.1.0
Introduced on the S-Series.
Border Gateway Protocol
341
Содержание Networking S6000 System
