Dell Networking S6000 System, Справочное руководство

Страница: 1193 / 1510

Version 6.1.1.0 Introduced on the E-Series.
rmon event
Add an event in the RMON event table.
S6000
Syntax
rmon event number [log] [trap community ] [description string ]
[owner name]
To disable RMON on an interface, use the
no rmon event number [log]
[trap community ] [description string ]
command.
Parameters
number Assign an event number in integer format from 1 to 65535.
The number value must be unique in the RMON event table.
log (OPTIONAL) Enter the keyword
log
to generate an RMON
log entry. The log entry is triggered and sets the eventType in
the RMON MIB to log or log-and-trap. The default is
No log .
trap
community
(OPTIONAL) Enter the keyword
trap
then an SNMP
community string to configure the eventType setting in the
RMON MIB. This keyword sets either snmp-trap or log-and-
trap. The default is
public .
description
string
(OPTIONAL) Enter the keyword
description
then a string
describing the event.
owner name (OPTIONAL) Enter the keyword
owner
then the name of the
owner of this event.
Defaults As noted in the Parameters section.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Remote Monitoring (RMON)
1193