Dell Networking S6000 System, Справочное руководство

Страница: 990 / 1510

Parameters
seconds Enter the number of seconds for the interval. The range is
from 1 to 65535. The default is
10 seconds .
Defaults 10 seconds
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
Usage
Information The time interval between the hello packets must be the same for routers in a
network.
Related
Commands ip ospf dead-interval — sets the time interval before a router is declared dead.
ip ospf message-digest-key
Enable OSPF MD5 authentication and send an OSPF message digest key on the interface.
S6000
Syntax
ip ospf message-digest-key keyid md5 key
To delete a key, use the
no ip ospf message-digest-key keyid
command.
Parameters
keyid Enter a number as the key ID. The range is from 1 to 255.
key Enter a continuous character string as the password.
Defaults No MD5 authentication is configured.
Command
Modes INTERFACE
990
Open Shortest Path First (OSPFv2 and OSPFv3)