Dell Networking S6000 System, Справочное руководство

Страница: 245 / 1510

match ip route-source — redistributes routes that match routes advertised by other
routers.
match metric — redistributes routes that match a specific metric.
match route-type — redistributes routes that match a route type.
route-map
Enable a route map statement and configure its action and sequence number. This command also places
you in ROUTE-MAP mode.
S6000
Syntax
route-map map-name [permit | deny] [ sequence-number ]
To delete a route map, use the
no route-map map-name [permit | deny]
[ sequence-number ]
command.
Parameters
map-name Enter a text string of up to 140 characters to name the route
map for easy identification.
permit (OPTIONAL) Enter the keyword
permit
to set the route map
default as permit. If you do not specify a keyword, the default
is
permit
.
deny (OPTIONAL) Enter the keyword
deny
to set the route map
default as deny.
sequence-
number (OPTIONAL) Enter a number to identify the route map for
editing and sequencing with other route maps. You are
prompted for a sequence number if there are multiple
instances of the route map. The range is from 1 to 65535.
Defaults Not configured.
If you do not define a keyword (
permit
or
deny
) for the route map, the
permit
action is the default.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Access Control Lists (ACL)
245