Dell Networking S6000 System, Справочное руководство

Страница: 1295 / 1510

• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a ten-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
Defaults Not configured.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0) Introduced on the S-Series and Z-Series.
Usage
Information
The
source-interface interface
attribute is applicable for both the
SSH
client
as well as the
COPY
(SCP) commands. Using these attributes the client
session tags an error to the user during run time, in case there is a mismatch
between this command and the
ip ssh vrf
command.
Example
Dell(conf)#ip ssh source-interface tengigabitethernet 0/36
Dell(conf)#do ssh 10.10.10.2 -l admin
Dell(conf)#no ip ssh source-interface
ip ssh vrf
Specify a VRF for an outgoing SSH connections.
Syntax
ip ssh vrf vrf-name
To delete a VRF for an outgoing SSH connection, use the
no ip ssh vrf vrf-
name
command.
Parameters
vrf vrf-name Enter the keyword
vrf
and then the name of the VRF to
configure that VRF for an outgoing SSH session.
Defaults Not configured.
Command
Modes CONFIGURATION
Security
1295