manualshive.com logo in svg

Dell Networking S6000 System, Справочное руководство

Поделиться
Скачать
Dell Networking S6000 System Скачать руководство пользователя страница 885

Version 8.3.7.0

Introduced on the S4810.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

pre-Version 
6.2.1.1

Introduced on the E-Series.

Usage 
Information

When you use the 

no tagged

 command, the interface is automatically placed in 

the Default VLAN as an untagged interface unless the interface is a member of 
another VLAN. If the interface belongs to several VLANs, remove it from all VLANs 
to change it to an untagged interface.

Tagged interfaces can belong to multiple VLANs, while untagged interfaces can 
only belong to one VLAN at a time.

Related 
Commands

interface vlan

 — configures a VLAN.

untagged

 — specifies which interfaces in a VLAN are untagged.

track ip

Track the Layer 3 operational state of a Layer 3 VLAN, using a subset of the VLAN member interfaces.

S6000

Syntax

track ip 

interface

To remove the tracking feature from the VLAN, use the 

no track ip 

interface 

command.

Parameters

interface

Enter the following keywords and slot/port or number 
information:

• For a Port Channel interface, enter the keywords 

port-

channel

 then a number. The range is from 1 to 128.

• For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the slot/port information.

Defaults

Not configured.

Command 
Modes

INTERFACE VLAN

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Layer 2

885

Содержание Networking S6000 System







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды