Dell Networking S6000 System, Справочное руководство

Страница: 82 / 1510

The total amount of space allowed is 16 FP Blocks. System flow requires three
blocks and these blocks cannot be reallocated. The
ipv4acl
profile range is from
1 to 4.
When configuring space for IPv6 ACLs, the total number of Blocks must equal 13.
Ranges for the CAM profiles are from 1 to 10, except for the
ipv6acl
profile which
is from 0 to 10. The
ipv6acl
allocation must be a factor of 2 (2, 4, 6, 8, 10).
If you enabled BMP 3.0, to perform a reload on the chassis to upgrade any
configuration changes that have changed the NVRAM content, use the
reload
conditional nvram-cfg-change
command.
clear line
Reset a terminal line.
S6000
Syntax
clear line { line-number | aux 0 | console 0 | vty number }
Parameters
line-number Enter a number for one of the 12 terminal lines on the
system. The range is from 0 to 11.
aux 0 Enter the keywords
aux 0
to reset the auxiliary port.
console 0 Enter the keywords
console 0
to reset the console port.
vty number Enter the keyword
vty
then a number to clear a terminal
line. The range is from 0 to 9.
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
82
Control and Monitoring