maximum
Enter a number as the maximum number of prefixes allowed
for this BGP router. The range is from 1 to 4294967295.
threshold
(OPTIONAL) Enter a number to be used as a percentage of
the maximum value. When the number of prefixes reaches
this percentage of the maximum value, the E-Series software
sends a message. The range is from 1 to 100 percent. The
default is
75
.
warning-only
(OPTIONAL) Enter the keyword
warning-only
to set the
router to send a log message when the maximum value is
reached. If this parameter is not set, the router stops peering
when the maximum number of prefixes is reached.
NOTE: When you set this option, the router accepts BGP
prefixes only until the maximum configured value. After
the maximum number is reached, the router drops any
additional prefixes that it receives.
Defaults
threshold =
75
Command
Modes
ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 7.8.1.0
Introduced on the S-Series.
Version 7.7.1.0
Introduced on the C-Series.
Usage
Information
If you configure the
neighbor maximum-prefix
command and the neighbor
receives more prefixes than the
neighbor maximum-prefix
command
configuration allows, the neighbor goes down and the
show ip bgp summary
command displays (prfxd) in the State/PfxRcd column for that neighbor. The
neighbor remains down until you enter the
clear ip bgp
command for the
neighbor or the peer group to which the neighbor belongs or you enter the
neighbor shutdown
and
neighbor no shutdown
commands.
Related
Commands
— displays the current BGP configuration.
372
Border Gateway Protocol
Содержание Networking S6000 System
