Dell Networking S6000 System, Справочное руководство

Страница: 1180 / 1510

pre-Version
6.2.1.1 Introduced on the E-Series.
Usage
Information To redistribute the default route (0.0.0.0/0), configure the
default-information
originate
command.
Related
Commands
default-information originate — generates a default route for RIP traffic.
redistribute isis
Redistribute routing information from an IS-IS instance.
Syntax
redistribute isis [ tag ] [level-1 | level-1-2 | level-2] [metric
metric-value ] [route-map map-name ]
To disable redistribution, use the
no redistribute isis [ tag ] [level-1 |
level-1-2 | level-2] [metric metric-value ] [route-map map-name ]
command.
Parameters
tag (OPTIONAL) Enter the name of the IS-IS routing process.
level-1 (OPTIONAL) Enter the keywords
level-1
to redistribute
only IS-IS Level-1 routes.
level-1-2 (OPTIONAL) Enter the keywords
level-1-2
to redistribute
both IS-IS Level-1 and Level-2 routes.
level-2 (OPTIONAL) Enter the keywords
level-2
to redistribute
only IS-IS Level-2 routes.
metric metric-
value
(OPTIONAL) Enter the keyword
metric
then a number as
the metric value. The range is from 0 to 16.
route-map
map-name
(OPTIONAL) Enter the keywords
route-map
then the name
of a configured route map.
Defaults Not configured.
Command
Modes ROUTER RIP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
1180
Routing Information Protocol (RIP)