Dell Networking S6000 System, Справочное руководство

Страница: 1231 / 1510

Usage
Information To define a password for the level to which you are assigning privilege or access,
use the
enable password
command.
privilege level (LINE mode)
Change the access level for users on the terminal lines.
S6000
Syntax
privilege level level
To delete access to a terminal line, use the
no privilege level level
command.
Parameters
level level
Enter the keyword
level
then a number for the access level.
The range is from 0 to 15.
Level 1 is EXEC mode and Level 15 allows access to all CLI
modes.
Defaults level = 15
Command
Modes LINE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Authentication and Password Commands
To manage access to the system, use the following the commands.
Security
1231