Dell Networking S6000 System, Справочное руководство

Страница: 1356 / 1510

snmp-server view
Configure an SNMPv3 view.
S6000
Syntax
snmp-server view view-name oid-tree {included | excluded}
To remove an SNMPv3 view, use the
no snmp-server view view-name oid-
tree {included | excluded}
command.
Parameters
view-name Enter the name of the view (not to exceed 20 characters).
oid-tree Enter the OID sub tree for the view (not to exceed 20
characters).
included (OPTIONAL) Enter the keyword
included
to include the MIB
family in the view.
excluded (OPTIONAL) Enter the keyword
excluded
to exclude the
MIB family in the view.
Defaults none
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.2(0.0) Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information The
oid-tree
variable is a full sub-tree starting from 1.3.6 and cannot specify the
name of a sub-tree or a MIB. The following Example configures a view named
rview that allows access to all objects under 1.3.6.1.
1356
Simple Network Management Protocol (SNMP) and Syslog