Related
Commands
— configures a confederation ID.
— enables 4-byte support for the BGP process.
bgp dampening
Enable BGP route dampening and configure the dampening parameters.
S6000
Syntax
bgp dampening [
half-life reuse suppress max-suppress-time
]
[route-map
map-name
]
To disable route dampening, use the
no bgp dampening [
half-life reuse
suppress max-suppress-time
] [route-map
map-name
]
command.
Parameters
half-life
(OPTIONAL) Enter the number of minutes after which the
Penalty is decreased. After the router assigns a Penalty of
1024 to a route, the Penalty is decreased by half after the
half-life period expires. The range is from 1 to 45. The default
is
15 minutes
.
reuse
(OPTIONAL) Enter a number as the reuse value, which is
compared to the flapping route’s Penalty value. If the Penalty
value is less than the reuse value, the flapping route is once
again advertised (or no longer suppressed). The range is from
1 to 20000. The default is
750
.
suppress
(OPTIONAL) Enter a number as the suppress value, which is
compared to the flapping route’s Penalty value. If the Penalty
value is greater than the suppress value, the flapping route is
no longer advertised (that is, it is suppressed). The range is
from 1 to 20000. The default is
2000
.
max-suppress-
time
(OPTIONAL) Enter the maximum number of minutes a route
can be suppressed. The default is four times the half-life
value. The range is from 1 to 255. The default is
60 minutes
.
route-map
map-name
(OPTIONAL) Enter the keyword
route-map
then the name
of a configured route map.
Only
match
commands in the configured route map are
supported.
Defaults
Disabled.
Command
Modes
• ROUTER BGP
• ROUTER BGP-address-family
336
Border Gateway Protocol
Содержание Networking S6000 System
