manualshive.com logo in svg

Dell Networking S6000 System, Справочное руководство

Поделиться
Скачать
Dell Networking S6000 System Скачать руководство пользователя страница 333

Version 9.0.2.0

Introduced on the S6000.

Version 
8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 7.8.1.0

Introduced on the S-Series.

Version 7.7.1.0

Introduced on the C-Series.

Usage 
Information

When a BGP cluster contains only one route reflector, the cluster ID is the route 
reflector’s router ID. For redundancy, a BGP cluster may contain two or more route 
reflectors. Assign a cluster ID with the 

bgp cluster-id

 command. Without a 

cluster ID, the route reflector cannot recognize route updates from the other route 
reflectors within the cluster.

The default format for displaying the cluster-id is dotted decimal, but if you enter 
the cluster-id as an integer, it is displayed as an integer.

This command automatically restarts the BGP instance for the configuration to 
take effect.

Related 
Commands

bgp client-to-client reflection

 — enables route reflection between the route 

reflector and clients.

neighbor route-reflector-client

 — configures a route reflector and clients.

show ip bgp cluster-list

 — views paths with a cluster ID.

bgp confederation identifier

Configure an identifier for a BGP confederation.

S6000

Syntax

bgp confederation identifier 

as-number

To delete a BGP confederation identifier, use the 

no bgp confederation 

identifier as-number

 command.

Parameters

as-number

Enter the AS number. The range is from 0 to 65535 (2 byte), 
from 1 to 4294967295 (4 byte), or from 0.1 to 65535.65535 
(dotted format).

Defaults

Not configured.

Command 
Modes

ROUTER BGP

Border Gateway Protocol

333

Содержание Networking S6000 System







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды