Dell Networking S6000 System, Справочное руководство

Страница: 510 / 1510

show hardware layer2
Display Layer 2 ACL or eg data for the selected stack member and stack member port-pipe.
S6000
Syntax
show hardware layer2 {eg-acl | in-acl} stack- unit id port-set
0–0
Parameters
eg-acl | in-acl Enter either the keyword
eg-acl
or the keyword
in-acl
to
select between ingress or egress ACL data.
stack- unit id Enter the keyword
stack-unit
to select a stack ID. The
range is 0 for the S6000.
port-set 0–0 Enter the keywords
port-set
with a port-pipe number. .
The range is 0 for the S6000.
Defaults none
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Usage
Information The unit numbers given are internal port numbers.
show hardware layer3
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
S6000
Syntax
show hardware layer3 {acl | qos} stack-unit number port-set 0–0
Parameters
acl | qos Enter either the keyword
acl
or the keyword
qos
to select
between ACL or QoS data.
510
Debugging and Diagnostics