Dell Networking S6000 System, Справочное руководство

Страница: 1294 / 1510

Defaults None
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0) Introduced on the S-Series and Z-Series.
Usage
Information
You can enable the SSH server on either a management VRF or a user defined VRF
but not both. If no VRF is specified, then the SSH server is enabled on the default
VRF.
If the SSH server is enabled on a VRF with name vrf1, then use the following
command to restart the SSH server on a VRF with name vrf2:
ip ssh server
vrf vrf2
. If the SSH server is enabled on a VRF with name vrf1, then use the
following command to restart the SSH server on the default VRF:
ip ssh server
vrf
.
Example
• Dell(conf)#ip ssh server vrf vrf1
• Dell(conf)#no ip ssh server vrf
• Dell(conf)#ip ssh server vrf management
• Dell(conf)#no ip ssh server vrf
Related
Commands show ip ssh — displays the ssh information.
ip ssh source-interface
Specifies an interface’s IP address as the source IP address for an outgoing SSH connections.
Syntax
ip ssh source-interface interface
To delete a source interface, use the
no ip ssh source-interface
command.
Parameters
interface Enter the following keywords and slot/port or number
information:
• For a 100/1000 Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information.
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information.
• For Loopback interfaces, enter the keyword
loopback
then a number from zero (0) to 16838.
• For the Null interface, enter the keywords
null 0
.
1294
Security