Dell Networking S6000 System, Справочное руководство

Страница: 228 / 1510

Version 7.8.1.0 Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names are up to 16 characters long.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
Usage
Information Prefix lists redistribute OSPF and RIP routes meeting specific criteria.
Related
Commands
show ip route list — displays IP routes in an IP prefix list.
show ip prefix-list summary — displays a summary of the configured prefix lists.
seq
To a deny or permit filter in a prefix list while configuring the filter, assign a sequence number.
S6000
Syntax
seq sequence-number {deny | permit} {any} | [ ip-prefix / nn {ge
min-prefix-length } {le max-prefix-length }] | [bitmask number ]
To delete a specific filter, use the
no seq sequence-number {deny |
permit} {any} | [ ip-prefix {ge min-prefix-length } {le max-
prefix-length }] | [bitmask number ]
.
Parameters
sequence-
number Enter a number. The range is from 1 to 4294967294.
deny Enter the keyword
deny
to configure a filter to drop packets
meeting this condition..
permit Enter the keyword
permit
to configure a filter to forward
packets meeting this condition.
any (OPTIONAL) Enter the keyword
any
to match any packets.
ip-prefix /nn (OPTIONAL) Specify an IP prefix in the network/length
format. For example, 35.0.0.0/8 means match the first 8 bits
of address 35.0.0.0.
ge min-prefix-
length
(OPTIONAL) Enter the keyword
ge
and then enter the
minimum prefix length, which is a number from zero (0) to
32.
le max-prefix-
length
(OPTIONAL) Enter the keyword
le
and then enter the
maximum prefix length, which is a number from zero (0) to
32.
228
Access Control Lists (ACL)