manualshive.com logo in svg

Dell Networking S6000 System, Справочное руководство

Поделиться
Скачать
Dell Networking S6000 System Скачать руководство пользователя страница 986

Defaults

By default, OSPF routers are both helper and restart routers during a graceful 
restart.

Command 
Modes

ROUTER OSPF

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Introduced on the S6000.

Version 
8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1

Introduced on the Z9000.

Version 
8.3.12.0

Introduced on the S4810.

Version 7.8.1.0

Added support for Multi-Process OSPF. Added 

Restart

 and 

Helper

 roles support on the S-Series.

Version 7.7.1.0

Added 

Helper-Role

 support on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

pre-Version 
6.1.1.1

Introduced on the E-Series.

ip ospf auth-change-wait-time

OSPF provides a grace period while OSPF changes its interface authentication type. During the grace 

period, OSPF sends out packets with new and old authentication scheme until the grace period expires.

S6000

Syntax

ip ospf auth-change-wait-time 

seconds

To return to the default, use the 

no ip ospf auth-change-wait-time 

command.

Parameters

seconds

Enter the seconds. The range is from 0 to 300.

Defaults

zero (0) seconds

.

Command 
Modes

INTERFACE

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

986

Open Shortest Path First (OSPFv2 and OSPFv3)

Содержание Networking S6000 System







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды