manualshive.com logo in svg

Dell Networking S6000 System, Справочное руководство

Поделиться
Скачать
Dell Networking S6000 System Скачать руководство пользователя страница 979

Parameters

prefix-list-
name

Enter the name of a configured prefix list.

interface

(OPTIONAL) Enter one of the following keywords and slot/
port or number information:

• For Port Channel groups, enter the keywords 

port-

channel

 then a number. For the C-Series and S-Series, 

the range is from 1 to 128.

• For a SONET interface, enter the keyword 

sonet

 then the 

slot/port information.

• For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port information.

• For a VLAN, enter the keyword 

vlan

 then a number from 

1 to 4094.

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the slot/port information.

Defaults

Not configured.

Command 
Modes

ROUTER OSPF

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Introduced on the S6000.

Version 
8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 7.8.1.0

Added support for the Multi-Process OSPF.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

pre-Version 
6.1.1.1

Introduced on the E-Series.

distribute-list out

To restrict certain routes destined for the local routing table after the SPF calculation, apply a filter.

S6000

Syntax

distribute-list 

prefix-list-name

 out [bgp | connected | isis | 

rip | static]

Open Shortest Path First (OSPFv2 and OSPFv3)

979

Содержание Networking S6000 System







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды