Dell Networking S6000 System, Справочное руководство

Страница: 988 / 1510

pre-Version
6.1.1.1 Introduced on the E-Series.
Usage
Information All neighboring routers in the same network must use the same password to
exchange OSPF information.
ip ospf cost
Change the cost associated with the OSPF traffic on an interface.
S6000
Syntax
ip ospf cost cost
To return to default value, use the
no ip ospf cost
command.
Parameters
cost Enter a number as the cost. The range is from 1 to 65535.
Defaults The default cost is based on the reference bandwidth.
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
Usage
Information
If this command is not configured, cost is based on the
auto-cost
command.
When you configure OSPF over multiple vendors, to ensure that all routers use the
same cost, use the
ip ospf cost
command. Otherwise, OSPF routes improperly.
Related
Commands auto-cost — controls how the OSPF interface cost is calculated.
988
Open Shortest Path First (OSPFv2 and OSPFv3)