Dell Networking S6000 System, Справочное руководство

Страница: 1352 / 1510

Parameters
name Enter the name of the user (not to exceed 20 characters), on
the host that connects to the agent.
group_name Enter a text string (up to 20 characters long) as the name of
the group. The following groups are created for mapping to
read/write community/security-names (defaults):
•
v1v2creadu
— maps to a community with
ro
permissions.
•
1v2cwriteu
— maps to a community
rw
permissions.
remote ip-
address
Enter the keywords
udp-port
then the user datagram
protocol (UDP) port number on the remote device. The
range is from 0 to 65535. The default is
162 .
vrf vrf-name Enter the keywords
vrf
and then the name of the VRF this is
used to connect to the SNMP server.
NOTE: Use this attribute to specify a VRF name that is
used to connect to the remote host. If no VRF is
specified, then the default VRF is used.
udp-port port-
number
Enter the keywords
udp-port
then the UDP (User Datagram
Protocol) port number on the remote device. The range is
from 0 to 65535. The default is
162 .
1 | 2c | 3 (OPTIONAL) Enter the security model version number (
1
,
2c
,
or
3
):
•
1
is the least secure version.
•
3
is the most secure of the security modes.
•
2c
allows transmission of informs and counter 64, which
allows for integers twice the width of what is normally
allowed.
The default is 1 .
encrypted (OPTIONAL) Enter the keyword
encrypted
to specify the
password appear in encrypted format (a series of digits,
masking the true characters of the string).
auth (OPTIONAL) Enter the keyword
auth
to specify
authentication of a packet without encryption.
md5 | sha (OPTIONAL) Enter the keyword
md5
or
sha
to designate the
authentication level.
•
md5
— Message Digest Algorithm
•
sha
— Secure Hash Algorithm
auth-password (OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the agent to receive packets from the
host. Minimum: eight characters long.
1352
Simple Network Management Protocol (SNMP) and Syslog