background image

EPS-1XPB-1XPL-M1-24V

Larson Electronics, LLC

 

  Phone: (800) 369-6671 

 Fax: (903) 498-3364 

  www.larsonelectronics.com 

1

 of 

2

 

Explosion Proof Push Button Switch

Class I, II, III - (1) Maintained PB, (1) Pilot Light - NEMA

 

Instruction Manual 

Thank you for your purchase of the Larson Electronics

 

EPS-1XPB-1XPL-M1-24V

.

WARNING: 

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. 

CRITICAL SAFETY INSTRUCTIONS: 

INSTALLATION SHOULD ONLY BE CONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY

RELEVANT LOCAL BUILDING CODES.

RISK OF FIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF 

FIXTURE'S

 ELECTRICAL

SYSTEMS. IF NOT QUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.

BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.

MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE

 FIXTURE'S

 RATED VOLTAGE.

TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP

OBJECTS. SUITABLE FOR DAMP LOCATIONS.

WARNING 

TO AVOID THE RISK OF FIRE, EXPLOSION OR ELECTRIC SHOCK, THIS PRODUCT SHOULD BE INSTALLED, 

INSPECTED AND MAINTAINED BY A QUALIFIED ELECTRICIAN ONLY, IN ACCORDANCE WITH ALL 

APPLICABLE ELECTRICAL CODES. 

TO AVOID ELECTRIC SHOCK: 

BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.

PRODUCT MUST BE  CONNECTED TO A WIRING  SYSTEM  WITH AN EQUIPMENT-GROUNDING

CONDUCTOR.  

TO AVOID EXPLOSION: 

MAKE SURE THE SUPPLY VOLTAGE IS WITHIN THE VOLTAGE RATING.

ENSURE THE MARKED T RATING  IS LESS THAN THE IGNITION TEMPERATURE OF THE HAZARDOUS

ATMOSPHERE.

DO NOT OPERATE IN AMBIENT TEMPERATURES ABOVE THOSE INDICATED ON  THE PRODUCT

NAMEPLATE.

DO NOT OPERATE IF THE  LENS, CORD, SEALS, HOUSING, RECEPTACLES, ETC. IS CRACKED OR

 

DAMAGED.

IF SO, DISCONTINUE USE AND CONTACT MANUFACTURER FOR REPLACEMENT PARTS.

ALL FASTENERS SHOULD BE PROPERLY SEATED.

The Larson Electronics EPS-1XPB-1XPL-M1-24V Explosion Proof Push Button Switch is suitable for use in Class I, II and III rated 

combustible sites. This weatherproof unit operates on 24V. Operators may access one green, maintained push button and one green 

pilot light on the NEMA-rated device.

MOUNTING

The EPS-1XPB-1XPL-M1-24V is compatible with surface mounting applications.

WIRING 
Standard pigtail(flying leads) wiring 

We strongly encourage a licensed electrician install this product

, in all locations especially in outdoor areas 

where weatherproofing may be required. Universal voltage driver permits operation at 

24

V.

Warning: 

Check product label for correct input voltage!

 

Attach supply line wires to the appropriate light fixture wires as shown in the 

diagram 

 

Secure each pair of wires according to the diagram. Utilize a junction box or similar 

device and take precautionary steps for weatherproofing all  connections if 

installed in a location where water may come in contact with the unit. Ensure the unit is 

properly grounded and that wiring is done according to all local and national electrical/

building codes.

Отзывы: