NEC NEAX 2000, Programming Manual

Page: 906 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 124
Revision 1.0
(1/1)
CONSULTATION HOLD - ALL CALLS - D
term
GENERAL DESCRIPTION
This service feature permits a D
term
station user to hold any incoming or outgoing public network or
Tie Line, or any intraoffice calls, while originating a call to another system station within the system.
STATION APPLICATION
All D
term
s
OPERATING PROCEDURE
To hold original call and place second call from a D
term
:
1. Depress
Transfer
key; receive Special Dial Tone.
2. Original call is held.
3. Dial second station number; receive Ringback Tone.
4. Second station answers; CONSULTATION HOLD state has been entered.
To return to original call from a D
term
:
1. In any of the following cases, the calling station can return to the original call by depressing the
Transfer
key:
a. Second station is busy.
b. Calling station cannot gain access to second station due to restriction or any other reason.
c. Second station does not answer.
2. If the second station hangs up, the calling station will automatically be returned to the original call.
3. If the second station stays on, depressing the
Transfer
key returns the original call to the D
term
while the second call is being held.
By depressing the
Conf
key, a THREE-WAY CALLING will be initiated.
SERVICE CONDITIONS
1. Refer to CONSULTATION HOLD - ALL CALLS.