NEC NEAX 2000, Programming Manual

Page: 827 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 45
Revision 1.0
(1/1)
AUTOMATIC INTERCOM-D
term
GENERAL DESCRIPTION
AUTOMATIC INTERCOM provides a path for Voice Announcement Calls with HANDSFREE
ANSWERBACK between two D
term
using a dedicated line key. Private conversations can be held by using
the D
term
handsets.
STATION APPLICATION
All D
term
s
OPERATING PROCEDURE
1. The calling party lifts handset and depresses
AUTOMATIC INTERCOM
key.
2. The calling party receives tone burst and can Answerback Handsfree.
OR
1. The calling party can change calls to ringing call by dialling 1. (Each 1 dialled changes the mode from
ringing to Voice Announcement or vice versa).
The called party must depress
AUTOMATIC INTERCOM
key and lift handset to answer ringing call.
SERVICE CONDITIONS
1. Only two D
term
can share an AUTOMATIC INTERCOM path.
2. The maximum number of AUTOMATIC INTERCOM paired stations per system is 32 (16 Automatic
Intercoms).
3. More than one AUTOMATIC INTERCOM can appear on a D
term
.
4. AUTOMATIC INTERCOMs are private by definition.
5. Each AUTOMATIC INTERCOM pair uses two extensions which can be software extensions (no sup-
porting hardware is required).
6. DUAL HOLD with hold recall is available on AUTOMATIC INTERCOM, other extension features
such as CALL TRANSFER, CALL PARK, etc. are not available.
7. When the called D
term
is busy, the AUTOMATIC INTERCOM caller will receive Busy Tone.