NEC NEAX 2000, Programming Manual

Page: 894 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 112
Revision 1.0
(1/2)
CALLER ID DISPLAY
GENERAL DESCRIPTION
Without answering incoming calls or held calls which terminates to the line keys of a D
term
, the calling
party’s information can be confirmed by the indications on the LCD. The following information is indi-
cated according to the kind of the calls.
STATION APPLICATION
All D
term
s with an LCD
OPERATING PROCEDURE
1. Press a
CID
(Caller ID Display) key assigned to the programmable key on the D
term
.
The D
term
comes into CID mode for six seconds, the
CID
key lamp lights, and the LCD displays the
calling party’s information of the incoming/held call for six seconds.
2. If there are plural incoming calls or held calls, press the desired line key while the CID key lamp lights.
The LCD displays the calling party’s information of the incoming/held call for more six seconds.
If the line key which is pressed while CID mode has no incoming/held call, CID mode is cancelled.
3. When the
CID
key is pressed again in CID mode, the
CID
key lamp goes out and CID mode is can-
celled.
4. When the
CID
key is pressed during conversation, the LCD displays the calling party’s information of
the incoming/held call for six seconds.
Kind of Calling Party /Network
Displayed Information
Upper on LCD Lower on LCD
Extension Station number Station’s name if provided
MFC-R2 (for other countries only) Kind of trunk, trunk number Calling subscriber’s number
Caller ID Class
(for US, other countries only)
Kind of trunk, trunk number
Calling subscriber’s number or
Calling subscriber’s name
ISDN Calling party’s sub-address Calling subscriber’s number
CCIS
Station number Station’s name if provided
Kind of trunk Calling subscriber’s number
Other trunks Kind of trunk, trunk number None
Attendant Console “OPR” None