NEC NEAX 2000, Programming Manual

Page: 977 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 195
Revision 1.0
(1/2)
INTERNAL ZONE PAGING - D
term
GENERAL DESCRIPTION
The feature allows station users, Attendant Console to page over the built-in speaker of D
term
within a
single assigned zone, or within a maximum of six zones simultaneously (All Zone Paging).
STATION APPLICATION
All D
term
s
OPERATING PROCEDURE
To page from a D
term
or a Single Line Telephone:
1. Lift handset and receive Dial Tone.
2. Dial INTERNAL ZONE PAGING feature access code for the desired zone(s), or depress the
assigned line key for the desired zone(s).
3. Page the desired party.
To page from an Attendant Console:
1. Depress an idle LOOP key.
2. Dial INTERNAL ZONE PAGING feature access code for the desired zone(s).
3. Page the desired party.
To answer (Meet-Me) from a D
term
or a Single Line Telephone:
1. Lift handset and receive Dial Tone.
2. Dial Meet-Me Answer feature access code.
3. Converse.
SERVICE CONDITIONS
1. The maximum number of internal paging zones is 8, zone 0 through zone 7. Up to 8 internal zones can
be accessed simultaneously by different stations.
2. The paging station can only page to one zone at a time. For all-zone paging, the paging station can
page Zone 0 through Zone 5 simultaneously.
3. The maximum number of D
term
s within one zone is 16.
4. A busy D
term
will not be paged during an internal zone page.
5. D
term
can be assigned to more than one zone.
6. Meet-Me Answer cannot be done after performing a consultation hold.
7. Any station can page any zone.
8. The paging station will not receive Busy Tone when all stations in the paged zone are busy.