NEC NEAX 2000, Programming Manual

Page: 99 / 1200

BUSY VERIFICATION
– 79 –
A2076-10
BUSY VERIFICATION
PROGRAMMING
DESCRIPTION DATA
Provide the system with Busy Verification. (1)
(2) 012
1 : Available
Specify whether the Warning Tone is sent
to the connected parties.
• Three burst tone
[Australia/Other Countries]
• One burst tone
[New Zealand Only]
(1)
(2) 046
0 : Not sent
1 : To send
Specify the Warning Tone sent to connect-
ed parties. (1)
(2) 045
0 : Only once
1 : Every 4 sec.
Specify the Warning Tone sent to outside
party. (1)
(2) 076
0 : To send
1 : Not sent
Assign Service Restriction Class A to
each station.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Allow Busy Verification called side in the
Service Restriction Class A assigned by
CM12 Y=02.
•
(1)
(2)
Y=09
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the Busy Verification key to the AT-
TCON/DESKCON.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) +
+ Key
No.
F6107: Busy Verification
CM12
CM90
START
CM08
CM15
END
,