NEC NEAX 2000, Programming Manual

Page: 1048 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 266
Revision 1.0
(1/2)
PAD LOCK
GENERAL DESCRIPTION
The feature temporarily restricts telephones from making unauthorized calls by dialing special access
code when station users are away from their seats.
STATION APPLICATION
All stations
OPERATING PROCEDURE
To set:
1. Lift the handset and receive Dial Tone.
2. Dial PAD LOCK access code 1 (access code for AUTHORIZATION CODE).
3. Dial AUTHORIZATION CODE and receive Dial Tone.
4. Dial PAD LOCK access code 2 (access code for MAID STATUS).
5. Dial 1 and receive Service Set Tone.
6. Restore the handset.
To cancel:
1. Lift the handset and receive Dial Tone.
2. Dial PAD LOCK access code 1 (access code for AUTHORIZATION CODE).
3. Dial AUTHORIZATION CODE and receive Dial Tone.
4. Dial PAD LOCK access code 2 (access code for MAID STATUS).
5. Dial 2 and receive Service Set Tone.
6. Restore the handset.
SERVICE CONDITIONS
1. This feature restricts telephones from making C.O. outgoing calls and/or terminating calls from C.O.
trunks, stations, and Attendant. Stations in PAD LOCK status are able to place Station-to-Station calls
and outgoing calls using Attendant assisted calling.
2. If the station under PAD LOCK status dials a C.O. Line access code, the station is rerouted to one of
the following:
a. Reorder Tone
b. Attendant
3. Calls to stations in PAD LOCK status will receive Reorder Tone or, on a tenant basis, can be assigned
to transfer to the Attendant.
4. The PAD LOCK access code 1 and 2 can be one to three digits.
5. About Authorization Code limitations, refer to AUTHORIZATION CODE Features and Specifica-
tions.