NEC NEAX 2000, Programming Manual

Page: 271 / 1200

EXECUTIVE RIGHT OF WAY
EXECUTIVE RIGHT OF WAY-D
term
– 251 –
A2247-10
EXECUTIVE RIGHT OF WAY
EXECUTIVE RIGHT OF WAY-D
term
PROGRAMMING
DESCRIPTION DATA
Assign Service Restriction Class A to re-
quired stations.
•
(1)
(2)
Y=02
XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Allow Executive Right of Way in the Ser-
vice Restriction Class A assigned by
CM12 Y=02.
The setting of data for both called side and
calling side of Executive Right of Way
(CM15 Y=05 and CM15 Y=09) are re-
quired.
•
•
(1)
(2)
Y=05 Calling Side
Y=09 Called Side
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the access code for Executive
Right of Way.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A006: Executive Right of Way
Assign an Executive Right of Way key to
D
term
, if required.
•
(1)
(2)
Y=00
My Line No. +
+ Key No.
F0006: Executive Right of Way
Make the Conference trunk on the MP
card in Service.
•
(1)
(2)
Y=6
00-15: CFT Circuit No.
1 : In service
Specify whether the Warning Tone is sent
to the connected parties.
•
Three burst tone for Australia/Other
Countries
•
One burst tone for New Zealand
(1)
(2) 046
0 : Not sent
1 : To send
Specify the Warning Tone sent to connect-
ed parties during Executive Right of Way. (1)
(2) 045
0 : Only once
1 : Every 4 sec.
CM15
START
CM12
CM20
CM90
CM08
END
CM45
,