NEC NEAX 2000, Programming Manual

Page: 964 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 182
Revision 1.0
(1/1)
HOT LINE - OUTSIDE
GENERAL DESCRIPTION
This feature allows a station user to access an outside destination party in the HOT LINE service.
STATION APPLICATION
All D
term
s
OPERATING PROCEDURE
To place a HOT LINE - OUTSIDE call using Single Line Telephone:
1. Station-A lifts handset; Station-A hears Ringback Tone.
2. Outside Station-B is rung.
3. Station-B lifts handset; conversation proceeds.
To place a HOT LINE - OUTSIDE call using D
term
:
1. Station-A depresses the
BROKERAGE HOT LINE
key.
2. Station-A lifts handset or depresses
Speaker
key; Station-A hears Ringback Tone.
3. Station-B lifts handset; conversation proceeds.
SERVICE CONDITIONS
1. The destination parties for this service use abbreviated call codes prepared in SPEED CALLING-
SYSTEM. Therefore, the number of destination stations is limited by the capacity of SPEED
CALLING-SYSTEM. (Max. 100 stations)
2. Outside connection in BROKERAGE HOT LINE service can be realized.
The LCD indicates:
a. When a station user calls:
Trunk classification such as DDD, Tie, and trunk number.
b. When a station user answers a call:
Time duration, trunk classification, and trunk number.
3. When a station user of BROKERAGE HOT LINE - OUTSIDE is confronted with a situation in which
all trunks are busy or all senders are busy, the station user hears Reorder Tone.
No indication is shown on the LCD of the D
term
.
4. The STATION MESSAGE DETAIL RECORDING (SMDR) is available for outgoing calls in the HOT
LINE - OUTSIDE service.