NEC NEAX 2000, Programming Manual

Page: 274 / 1200

FAX ARRIVAL INDICATOR-D
term
– 254 –
A2247-10
FAX ARRIVAL INDICATOR-D
term
PROGRAMMING
Hot lines or House Phone feature assignment is used to implement this feature.
The number of facsimile station numbers and facsimile call station numbers that can be assigned
varies with each of the following cased.
• When Hot Lines-Inside/Outside are used, a maximum of 100 facsimile stations can be as-
signed. In addition, a maximum of 100 facsimile call stations can be assigned.
• When House Phone groups are used, a maximum of four facsimile stations can be assigned.
In addition, there is no limit to the number of facsimile call stations that can be assigned to each
facsimile station.
(1) Hot Line
DESCRIPTION DATA
Assign the fax call station number. This
number is used as the fax call indicator
button on the D
term
. Also, this is the num-
ber to which the incoming fax call is direct-
ed.
(1)
(2) 000-763: LEN
X-XXXXXXXX : Single Line Station
No.
FX-FXXXXXXX: My Line No.
Assign a virtual number to be used as a
fax call station number. (Similar to CM10
above but using a virtual extension instead
of a real station number.) (1)
(2) 000-255: Virtual LEN
X-XXXXXXXX: Virtual Extension No.
Assign the function of fax call station to the
station or virtual extension assigned
above in either CM10 or CM11.
•
(1)
(2)
Y=29
X-XXXXXXXX: Station No.
0 : FAX call station
1 : Ordinary station
CM11
START
CM10
CM13
A