NEC NEAX 2000, Programming Manual

Page: 1034 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 252
Revision 1.0
(1/1)
NON-DELAY OPERATION
GENERAL DESCRIPTION
This service feature allows the Attendant to place any calling party on hold, dial the call, and connect
the calling and called parties.
STATION APPLICATION
DESK CONSOLE
SMART CONSOLE
OPERATING PROCEDURE
1. Attendant answers operator call by depressing the ANSWER or ATND key.
2. Dial exchange network access code.
3. Dial desired telephone number.
4. Depress
RELEASE key.
5. Parties are connected.
SERVICE CONDITIONS
1. The Attendant may drop out of the connection either before or after the called station answers.
2. There is no AUTOMATIC RECALL for Station-to-Trunk and Trunk-to-Trunk calls when the called
party does not answer.
3. When the PASSING DIAL TONE feature is provided, once the Attendant has accessed an outgoing
trunk, the call may be released from the Attendant Console and the user is allowed to complete dial-
ling.
4. Fully restricted station users cannot be connected by the Attendant to a central office line using this
feature. Attempts are routed to Reorder Tone.
5. This feature allows the Attendant to place an outgoing call for a station user who reached the Attendant
via a dial “9” call without requiring the station user to hand on.
6. The Attendant can dial the called number for the station user or, using the PASSING DIAL TONE fea-
ture, allow the station user to complete the dialling.