ND-91285-001(E)
DECEMBER, 1999
Page 120
Revision 1.0
(1/1)
COMMON ROUTE INDIAL
GENERAL DESCRIPTION
This feature allows particular indialled numbers to terminate at the Attendant and to be indicated on
individual incoming call identification keys. The operator is thus able to identify the directory numbers
called, and to answer and process the calls appropriately. The feature is available for both exchange indial
lines and Tie Lines.
STATION APPLICATION
DESK CONSOLE
SMART CONSOLE
OPERATING PROCEDURE
An incoming trunk call that has dialled a Listed Directory Number (LDN) is directed to a destination as
defined in office data.
Each LDN may be allocated to a particular tenant and hence tenant features apply e.g. individual night
switching, restrictions on answering of TAS/indialled calls, specific Attendant Console to handle tenant,
etc.
LDN’s may be switched to a specific TAS bell, to a station or they may be redirected according to trunk
data, if no LDN redirection destination is provided.
SERVICE CONDITIONS
1. A maximum of seven LDNs can be specified for common route indial. These LDNs cannot be sepa-
rated on the basis of tie route and indial route.
2. If no destination is specified or if an invalid destination is used then the call will act as if the facility
was not available and divert according to trunk data.
3. Calls redirected to a station operate as if the station number had been dialled.
4. Calls redirected to a station which is set to divert to the Attendant Console will further divert according
to trunk data if the Attendant Console has been night switched.
5. Individual call forward on BUSY/DON’T ANSWER will take precedence over LDN BUSY/DON’T
ANSWER, also calls diverted by individual CALL FORWARD BUSY/DON’T ANSWER will not
divert further by LDN based diversions.
6. If the destination station (STA-A) is set to CALL FORWARDING ALL CALLS to another station
(STA-B) then all LDN BUSY/DON’T ANSWER diversions will apply to STA-B.
7. Stations cannot be barred from this feature and still be allowed indialled calls transferred from an
Attendant Console.
Summary of Contents for NEAX 2000
