NEC NEAX 2000, Programming Manual

Page: 467 / 1200

SPEED CALLING-STATION
– 447 –
A2437-10
DESCRIPTION DATA
Assign the programmable pause for
Speed Calling-Station.
•
(1)
(2)
Y=0
38
00-07: 1.5 sec.-12 sec.
(1.5 sec. increments)
If no data is set, the default setting is 1.5
sec.
Allocate the memory area for Speed Call-
ing-Station to each station. (1)
(2) X-XXXXXXXX: Station No.
W XX Y ZZ
W : 0-3 (Basic), 4-9 (Option):
1000-Slot Memory Block No.
XX: 00-99: Memory Start Block No.
(10-Slot Memory Block)
Y : Facility for programming the dialed
number from the station
0/1Effective/Ineffective
ZZ: 01-10: Number of 10-Slot Memory
Blocks
NOTE 1:
1000-Slot Memory Block number 4-9 (6000 Memory Parcels) can be used when
the Expansion Memory card (PZ-M537) is mounted on the MP card.
For using this memory area, there are several conditions as mensioned below:
• This memory area cannot be used for Speed Calling with Speed Calling keys
provided by CM90: F11XX on a D
term
, and cannot also be used for Speed Call-
ing-System.
• When exchanging the Expansion Memory card for another, data setting for this
memory area must be reentered.
• The Office Data in this memory area can be saved and loaded by MAT opera-
tions.
CM41
A
B
CM73