NEC NEAX 2000, Programming Manual

Page: 1031 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 249
Revision 1.0
(1/2)
NIGHT CONNECTION - FIXED
GENERAL DESCRIPTION
This service feature routes calls normally directed to the Attendant to a preselected common station
within the system in the NIGHT mode.
STATION APPLICATION
Not applicable
OPERATING PROCEDURE
To answer NIGHT CONNECTION calls:
1. Incoming calls to the Attendant in the NIGHT mode are automatically transferred to a preselected
NIGHT CONNECTION station.
2. Calling party hears Ringback Tone.
3. Ring signal is sent to the NIGHT CONNECTION station.
4. NIGHT CONNECTION station goes off-hook to answer incoming call. If necessary, this station
can transfer the incoming call to another station within the system using CALL TRANSFER - ALL
CALLS feature.
SERVICE CONDITIONS
1. Calls which are being processed or are in the hold state when the NIGHT mode is entered go on being
processed or held after the mode changeover has been completed by Attendant.
2, If the NIGHT CONNECTION station to which an incoming call has been directed is busy, the calling
party will hear Ringback Tone until the station becomes idle.
3. This service feature may be provided with NIGHT CONNECTION - FLEXIBLE and TRUNK
ANSWER FROM ANY STATION in the same system.
4. If the NIGHT CONNECTION station is set for CALL FORWARDING - ALL CALLS, incoming Cen-
tral Office trunk calls terminated to that station will be forwarded to the designated station.
5. Programmed NIGHT CONNECTION stations can utilize CALL HOLD, CALL TRANSFER and
THREE-WAY CALLING by CLASS OF SERVICE - INDIVIDUAL.
6. Incoming calls that will be routed to NIGHT CONNECTION stations are limited to DDD or DID.
7. If an incoming call has terminated to a fixed NIGHT Station, and if the station is busy or in LINE
LOCKOUT, the call will be forwarded to the TRUNK ANSWER FROM ANY STATION (TAS) unit,
if equipped.
8. The NIGHT station is assigned to each trunk, and the same NIGHT station can be assigned to several
trunks.