NEC NEAX 2000, Programming Manual

Page: 873 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 91
Revision 1.0
(1/2)
CALL PARK - SYSTEM
GENERAL DESCRIPTION
When an Attendant or a station user places a call onto the PARK (System) by performing predeter-
mined operations, this service feature allows any station within the system to retrieve the parked call.
STATION APPLICATION
All stations
DESK CONSOLE
SMART CONSOLE
OPERATING PROCEDURE
To park a call:
From a D
term
with an LCD:
1. Press
Transfer
key; receive Special Dial Tone.
2. Dial the CALL PARK code; receive Service Set Tone.
3. The trunk party receives Hold Tone.
4. The CALL PARK No. is displayed.
5. Replace the handset.
OR
1. Press the
CALL PARK - SYSTEM
key; receive Service Set Tone.
2. Replace the handset.
From an Attendant Console:
1. Dial the CALL PARK code (DERSK CONSOLE) or press the
CALL PARK - SYSTEM
key
(SMART CONSOLE); receive Service Set Tone.
2. The trunk party receives Hold Tone.
3. The CALL PARK No. is displayed.
4. Press
RELEASE
key.
From a D
term
without an LCD and from a Single Line Telephone:
1. Press
Transfer
key (D
term
) or momentarily press the hookswitch (Single Line Telephone);
receive Special Dial Tone.
2. Dial the CALL PARK Code or press the
CALL PARK - SYSTEM
key (D
term
).
3. Dial a PARK NO; receive Service Set Tone.
PARK No. = 00 to 19
*If the PARK No. dialled is busy, Busy Tone is heard. Then, dial another PARK No. again.
4. Replace the handset.