NEC NEAX 2000, Programming Manual

Page: 1036 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 254
Revision 1.0
(1/1)
NON-SQUARE LINE ASSIGNMENT - D
term
GENERAL DESCRIPTION
D
term
can have any desired line key assignment. This feature permits assignments to be tailored to each
individual’s needs. (The terminal’s primary extension line appearance is the only line key which cannot be
reassigned.)
STATION APPLICATION
All D
term
s
OPERATING PROCEDURE
No manual operation is required.
SERVICE CONDITIONS
1. Each line key can be assigned as one of the following:
• TRUNK ACCESS
• EXTENSION
• SAVE AND REPEAT
• DO NOT DISTURB
• DATA
• INTERCOM
• HOT LINE
• FEATURE ACCESS
Refer to the applicable Features and Specifications for more information on that feature.
2. Line key assignment is made in system programming using the MAINTENANCE ADMINISTRA-
TION TERMINAL (MAT) or CUSTOMER ADMINISTRATION TERMINAL (CAT).
3. The D
term
with 16 buttons has 15 programmable line keys. One line key is reserved for that station’s
primary extension.
4. The D
term
with 8 buttons has 7 programmable line keys. One line key is reserved for that station’s pri-
mary extension.
5. A maximum of one
DO NOT DISTURB
key and three
SAVE AND REPEAT
keys can be assigned
per D
term
.
6. Stations desiring dial tone from a specific line can press that line key before lifting the handset.
7. When SPEED CALLING-STATION is assigned to the line key on D
term
75 with no DSS key by the
system data, and an extension number is assigned to the line key by the station user, a lamp of the line
key indicates the busy/idle status of the extension.