NEC NEAX 2000, Programming Manual

Page: 504 / 1200

STATION MESSAGE DETAIL RECORDING (SMDR)
PROGRAMMING
Built-in SMDR Programming
– 484 –
A2477-10
DESCRIPTION DATA
Provide the SMDR service for outgoing
calls to the required station.
•
(1)
(2)
Y=06
X-XXXXXXXX: Station No.
1 : To provide
Provide the SMDR service for outgoing
calls to the required trunk routes.
•
(1)
(2)
Y=14
00-63: Trunk Route No.
1 : To provide
Assign a trunk access code sent to SMDR
for outgoing calls.
•
(1)
(2)
Y=44
00-63: Trunk Route No.
00-99: Trunk access code
Specify the timing of SMDR valid call timer
(pseudo-answer timer).
•
(1)
(2)
Y=0
03 (Pseudo-answer timer)
00-08: 8 sec. -40 sec.
(4 sec. increments)
If no data is set, the default data is 20-24
sec.
Specify the method of charging a trans-
ferred call.
The following table shows the station to
which call charging is to be made in the
case of various transfer patterns.
(1)
(2) 424: Charging method
0 : Charging to the first transferring
station or the final destination sta-
tion
1 : Split charging to both the transfer-
ring station and the transfer desti-
nation station
(1)
(2) 425: Charging destination
0 : First transferring station
1 : Final transfer destination station
CM41
CM13
A
CM35
CM08
STA: Station ATT: Attendant Console
DESTINATION
CM08>424=1
CM08>424=0 CM08>424=0
FROM TO CM08>425=1 CM08>425=0
STA A STA B
Split charging to STA A
and STA B
STA B STA A
STA ATT STA STA STA
ATT STA STA STA STA
ATT A ATT B
Split charging to ATT A
and ATT B
ATT B ATT A
B