NEC NEAX 2000, Programming Manual

Page: 798 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 16
Revision 1.0
(1/3)
ANNOUNCEMENT SERVICE
GENERAL DESCRIPTION
This feature allows station users to record messages on Digital Announcement Trunk (DAT) cards.
When a station user dials the feature access code for this feature, the user receives the corresponding mes-
sage from the system.
Also ANNOUNCEMENT SERVICE can be used to provide a voice message in the following cases;
• An incoming C.O. Line/Tie Line call has been transferred and encounters a busy or no answer
condition
• An incoming DID Line/Tie Line call has been terminated to a station and encounters a busy or
no answer condition
• Internal Recorded Message in place of Music on Hold
• Night Announcement
STATION APPLICATION
All stations
OPERATING PROCEDURE
To access:
1. Lift the handset; receive Dial Tone.
2. Dial the applicable ANNOUNCEMENT SERVICE access code.
3. Receive the message.
To erase an announcement:
1. Lift the handset; receive Dial Tone.
2. Dial the ANNOUNCEMENT SERVICE delete access code; receive Feature Dial Tone.
3. Dial the ANNOUNCEMENT SERVICE group number.
4. Restore the handset.
To record:
1. Lift the handset; receive dial tone.
2. Dial the ANNOUNCEMENT SERVICE record access code.
3. Dial the ANNOUNCEMENT SERVICE group number and the DAT card number.
4. Receive 3 seconds of Service Set Tone.
5. Record a message.
6. Restore the handset.
To record/replay/delete for each DAT card:
To record a message:
1. Go off-hook and receive Dial Tone.
2. Dial the DAT record access code and DAT card number. Three seconds of tone will be sup-
plied.
3. Record the message (maximum duration - 60 seconds).
4. Restore handset.