NEC NEAX 2000, Programming Manual

Page: 1137 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 355
Revision 1.0
(2/2)
STATION MESSAGE DETAIL RECORDING (SMDR) (CONT’D)
SERVICE CONDITIONS (CONT’D)
b. SMDR with AP00
• AP without expansion memory (standard) : up to 1,600 calls (if central office feature is
used, up to 800 calls)
• AP with expansion memory (optional) : up to 27,000 calls (if central office feature is
used, up to 26,000 calls)
When a call is completed, the record is sent to the output device and is removed from memory. If the
amount of calls exceeds the SMDR memory, those overflow calls will not be recorded.
8. The built-in SMDR can not be provided when AP00 is mounted.
9. The built-in SMDR does not provide a record of tandem calls.
10. ACCOUNT CODES, FORCED ACCOUNT CODES, AUTHORIZATION CODES and REMOTE
ACCESS TO SYSTEM codes on Tandem connections are reported in the applicable call record. (Tan-
dem : SMDR with AP00 only)
11. SMDR with AP00 provides a record of incoming Tie Line tandem calls where another trunk is dial
accessed.
12. Maximum of six digit extension number can be recorded. In case of built-in SMDR, if the number
exceeds six digits, only the last six digits will be sent.
13. For details of SMDR format, data stream, memory buffer, etc., refer to the Installation Procedure Man-
ual/Feature Programming Manual.